Banner Fullsize Sensors(英文).pdf

Banner Fullsize Sensors（英文）pdf,Banner Fullsize Sensors（英文）PHOTOELECTRICSQ45 Sensors579mm44.5mma Optional 7-element LED445mm54.1mm617mmsignal strength display and/445m乏5Cmor output switching logic.6m■2mor9 m attached cable,or Mini- Micro- and876mmEuro-style quick-disconnectOO卫Retroreflectivea Gasketed transparent cover87.6mmLaser modelsSuffix ll and llpConvergent Modelsa Triple- LED multi-functionSuffix cv and cv4indicatorsONmQPMAI599mmCFNed, Retroreflect87.6mmand diffuse modelsDetailedSuffix erd, dl dx, ly and lpGlass fiber modelsDimensionsSuffix f and FvPlastic fiber modelSuffix FPQ45,1030VdcPSensingOutput Excess Beam DataModelsMode/LED* RangeCable**TypeGain Pattern SheetQ456E Emitter2mQ456EQ Emitter4-Pin Mini QDQ456EQ5 Emitter4-Pin Euro QD60mEGCO-34 BP0-33Q45BB6R2m.470)(0.494Q45BB6RQOPPOSED4-Pin Mini QDQ45BB6RQ54-Pin Euro QDQ45BB6LV365782 mQ45BB6LVQ0.08-94-Pin Mini QDEGCR-44BPR-38(p.473)(p.497)Q45BB6LVQ5RETRO4-Pin Euro QdQ45BB6LP2 mQ45BB6LPQ0.15-6mt4-Pin Mini QdBipolar EGCR-45BPR-39NPNIPNP(.473)(.497)Q45BB6LPQ5POLAR RETRO4-Pin Euro QDQ45BB6LLCLASS22Q45BB6LLQ0.3-705-Pin Mini QDEGCR-46BPR-40,473)(.497)Q45BB6LLQ6RETRO LASER5-Pin Euro QDQ45BB6LLPCLASS22 m38244Q45BB6LLPQ0.6-40m5-Pin Mini QDEGCR-47BPR-40.473)(.497)Q45BB6LLPQ6POLAR RETRO5-Pin Euro QDC Infrared LED - Visible Red LED∨ isible red laserFor g m cable, add suffix W/30 to the 2 m model number(example, Q45B B6LV W/30 ) A model with a QD requires a mating cable (see pages 412, 414 and 420)Retroreflective range is specified using one model BRT-3 retroreflector(BRT-2X2 for Q45BB6LL models). Actual sensing range may differ, depending on efficiencyand reflective area of the retroreflector in use. See accessor es for more informationMore information online at bannerengineering com 147PHOTOELECTRICSQ45, 10-30V dc (cont'd)SensingOutput Excess Beam DataModelsMode/LED* RangeCableTypeGain Pattern SheetQ45BB6DSHORT RANGE2 mQ45BB6DQ450mm4-Pin Mini QDEGCD-40BPD-40(p.477)(p.500)Q45BB6DQ5DIFFUSE4-Pin Euro QDQ45BB6DLLONG RANGE2 mQ45BB6DLQ1.8m4-Pin Mini QDEGCD-41BPD-41(p.477)(p.50036578Q45BB6DLQ5DIFFUSE4-Pin Euro QDQ45BB6DXHIGH POWER2mQ45BB6DXQ4-Pin Mini QDEGCD-42 BPD-42m(p.477)(p.500)Q45BB6DXQ5DIFFUSE4-Pin Euro QDQ45BB6CV2 mQ45BB6CVQ38 mm4-Pin Mini QDEGCC-34 BPC-34503)Q45BB6CVQ54-Pin Euro qdBipolar36578Q45BB6CV42 mNPN/PNPCONVERGENTQ45BB6CV4Q00 mm4-Pin Mini QDEGCC-35BPC-35(480)(p.508)Q45BB6CV4Q54-Pin Euro QDQ45BB6F2 mEGCG-22BPG-22Q45BB6FQRange varies 4-Pin Mini QD&EGCG-23BPG-2336578Q45BB6FQ5GLASS FIBER by sensing 4-Pin Euro QD(486)(.505)modeQ45BB6FVand fiber2 mEGCG-24BPG-24Q45BB6FVQoptics used4-Pin Mini QDEGCG-25BPG-2536578Q45BB6FVQ5GLASS FIBER4-Pin Euro Qd(p.486)(p.505)Q45BB6FPRange varies2mby sensingEGCP-18BPP-18Q45BB6FPQmode4-Pin Mini QDand fiberEGCP-19 BPP-1936578Q45BB6FPQ5PLASTIC FIBERoptics used4-Pin Euro QD(489)(p.508)Q45,90-250VacSensingOutput Excess Beam DataModelsMode/LED* RangeCablerTypeGain Pattern SheetQ452E Emitter2 m36339Q452EQ Emitter3-Pin Mini QDQ452EQ1 Emitter4-Pin Micro QD37209Q45VR2R2 mSPDTEGCO-34BP0-33m36339Q45VR2RQI 5-Pin Mini QD elm Relay(p. 470)I(p. 494)PPOSEDQ45BW22R2 mSPSTQ45BW22RQ3-Pin Mini QD Solid-state37209Q45BW22RQ14-Pin Micro QDRelayMcre onInfrared LED - Visible Red LEDnext pageFor 9 m cable, add suffix W/30 to the 2 m model number (example, Q45B B6D W/30). A model with a QD requires a mating cable(see pages 412, 419 and 420)148 More informatian online at bannerengineering comPHOTOELECTRICSQ45, 90-250V ac (cont'dSensingOutput Excess Beam DataModelsMode/LED* RangeCable*xTypeGain Pattern Sheet乏5CmQ45VR2LV2 mSPDT36339Q45VR2LVQ5-Pin Mini qde/m RelayQ45BW22LV0.08-9mt2mEGCR-44BPR-38SPST473)(497)OO卫Q45BW22LVQRETRO3-Pin Mini QDSolid- state37209Q45BW22LVQ14-Pin Micro QDRelaQ45VR2LP2SPDT36339Q45VR2LPQ5-Pin Mini qDelm RelayQ45BW22LP0.15-6m2 mEGCR-45BPR-39SPST473)(0.497)ONmQ45BW22LPQPOLAR RETRO3-Pin Mini QD Solid-state37209Q45BW22LPQ14-Pin Micro QDRelayQ45VR2D2 mSPDTSHORT RANGQ45VR2DQ5-Pin Mini QDe/m Relay36339CFNQ45BW22D450mm2 mEGCD-40BPD-40SPST(p.500)Q45BW22DQDIFFUSE3-Pin Mini QD Solid-state37209Q45BW22DQ14-Pin Micro QDRelayQ45VR2DL2 mSPDT36339Q45VR2DLQ5-Pin Mini QDe/m RelayQ45BW22DL18m2mEGCD-41BPD-41SPST477(.500Q45BW22DLQDIFFUSE3-Pin Mini QD Solid-state37209Q45BW22DLQ14-Pin Micro QDRelayQ45VR2DX2 mSPDTHIGH POWERQ45VR2DXQ5-Pin Mini QDe/m Relay36339Q45BW22DX3 m2 mEGCD-42 BPD-42SPSTp.477)(.500Q45BW22DXQDIFFUSE3-Pin Mini QDSolid- state37209Q45BW22DXQ14-Pin Micro QDRelayQ45VR2CV2 mSPDT36339Q45VR2CVQ5-Pin mini qDe/m RelayQ45BW22CV38 mm2mEGCC-34BPC-34SPST.480)(p.503)Q45BW22CVQ3-Pin Mini QD Solid-state209Q45BW22CVQ14-Pin Micro QDRelayQ45VR2CV42 mSPDTCONVERGENT36339Q45VR2CV4Q5-Pin Mini QDe/m RelayEGCC-35 BPC-35Q45BW22CV4100mm2mSPSTp.480)(p.503)Q45BW22CV4Q3-Pin Mini QDSolid-state37209Q45BW22CV4Q14-Pin Micro QDRelayINfrared LEDm Visible Red LEDnext pagFor g m cable, add suffix W/30 to the 2 m model number (example, Q45VR2LV W/30 A model with a QD requires a mating cable(see pages 419 and 420)Retroreflective range is specified using one model BRT-3 retroreflector. Actual sensing range may differ, depending on efficiency and reflective area of the re roreflector in useSee Accessories for more informationMore information online at bannerengineering com149PHOTOELECTRICSQ45, 90-250V ac (cont'd)NFOunloadSensingOutput Excess Beam DataModelsMode/LED* RangeCableTypeGain PatternSheetQ45VR2F2 mSPDT36339Q45VR2FQ5-Pin Mini QD e/m Relay EGCG-22BPG-22Q45BW22F2 mSPSTEGCG-23BPG-23Q45BW22FQ GLASS FIBER Range varies 3-Pin Mini QD Solid-state(p.486)(p.505)|37209Q45BW22FQ1by sensing4-Pin Micro QDRelaymodeQ45VR2FVand fiber2mSPDT36339Q45VR2FVQoptics used5-Pin Mini QDe/m relay EGCG-24 BPG-24Q45BW22FV2m8SPSTEGCG-25 BPG-25Q45BW22FVQGLASS FIBER3-Pin Mini QD Solid-state(p505)37209Q45BW22FVQ14-Pin Micro QDRelayQ45VR2FP2mSPDTQ45VR2FPQRange varies5-Pin Mini QDelm Relay36339by sensingEGCP-18BPP-18Q45BW22FPmode2 mSPSTand fiberEGCP-19BPP-29Q45BW22FPQPLASTIC FIBERoptics used3-Pin Mini Qd Solid-state(p 489)(p. 508)37209Q45BW22FPQ14-Pin Micro QDRelayQ45 Universal voltage, 12-250v dc or 24-250V acSensingOutputExcess Beam DataModelsMode/LED* RangeCableTypeGain Pattern SheetQ453E2 mQ453EQ3-Pin Mini QD53997Q45VR3R2 mSPDTEGCO-34BPO-33Q45VR3RQ5-Pin Mini qde/m Relayp.470)(p.494)OPPOSEDQ45BW13R2 mSPST4-Pin Mini QD Solid-state Relay53999Q45BW13RQQ45VR3LVSPDT53997Q45VR3LVQ5-Pin mini qde/m Relay008-9mtEGCR-44BPR-38Q45BW13LV2 mSPSTp473)(p.497)RETRO53999Q45BW13LVQ4-Pin MiniQD Solid-state RelayQ45VR3LP2mSPDT53997Q45VR3LPQ5-Pin mini qdelm Relay EGCR-45 BPR-390.15-6mtQ45BW13LP2 mSPSTp.473)(p.497)OLAR RETRO53999Q45BW13LPQ4-Pin Mini Qd Solid-state RelayMore onC Infrared LEDm Visible Red LEDnext pageFor 9 m cable, add suffix W/30 to the 2 m model number(example, Q45VR2F W/30). A model with a QD requires a mating cable(see pages 419 and 420)Retroreflective range is specified using one model BRT-3 retroreflector. Actual sensing range may differ, depending on efficiency and reflective area of the retroreflec: or in useSee Accessories for more information150 More informatian online at bannerengineering comPHOTOELECTRICSQ45 Universal Voltage, 12-250V dc or 24:250V ac (cont'd)SensingOutputExcess Beam DataModelsMode/LED* RangeCableTypeGain Pattern Sheet乏5CmQ45VR3DSHORT RANGE2 mSPDT53997Q45VR3DQ5-Pin Mini QDe/m relay450mmEGCD-40 BPD-40Q45BW13D2 mSPSTp.477(p.500)DIFFUSE53999OO卫Q45BW13DQ4-Pin Mini QD Solid-state RelayQ45VR3DLLONG RANGE2 mSPDTQ45VR3DLQ5-Pin Mini QDe/m relay539971.8mEGCD-41BPD-41Q45BW13DL2 mSPSTp.477)(.5005399Q45BW13DLQDIFFUSE4-Pin Mini QD Solid-state RelayONmQ45VR3DX2 mHIGH POWERSPDT53997Q45VR3DXQ5-Pin Mini QDe/m relayEGCD-42BPD-42Q45BW13DX2 mSPSTp.477)(.500)53999CFNQ45BW13DXQDIFFUSE4-Pin Mini QD Solid-state RelayQ45VR3CV2 mSPDT53997Q45VR3CVQ5-Pin Mini qDe/m relay38 mmEGCC-34BPC-35Q45BW13CV2 mSPSTp480)(p.503)53999Q45BW13CVQ4-Pin Mini QD Solid-state RelayQ45VR3CV42 mSPDTCONVERGENT53997Q45VR3CV4Q5-Pin Mini QDe/m Relay100mmEGCC-35BPC-34Q45BW13CV42 mSPSTp480)(p.503)53999Q45BW13CV4Q4-Pin Mini QD Solid-state RelayQ45VR3F2 mSPDTQ45VR3FQe/m relayEGCG-22BPG-22539975-Pin Mini QDQ45BW13FSPSTEGCG-23BPG-23GLASs FIBER Range variesp.486)(0.505)5399Q45BW13FQby sensing4-Pin Mini QD Solid-state RelaymodeQ45VR3FVar2 mSPDToptics usedEGCG-24BPG-2453997Q45VR3FVQ5-Pin Mini QDe/m RelayQ45BW13FVmSPSTEGCG-25BPG-25GLASS FIBER.486)(p.505)5399Q45BW13FVQ4-Pin Mini Qd Solid-state relayQ45VR3FPRange varies2 mSPDTe/m RelayEGCP18BP1853997Q45VR3FPQby sensing 5-Pin Mini QDQ45BW13FPmodeand fiber2 mSPSTEGCP-19BPP-19PLASTIC FIBERQ45BW13FPQoptics used4-Pin Mini QD Solid-state Relay/ (p 489)(p. 508)53999m Visible Red LEDFor 9 m cable, add suffix W/30 to the 2 m model number (example, Q45VR3D W/30). A model with a QD requires a mating cable(see page 420)More information online at bannerengineering com151PHOTOELECTRICSQ45 DC SpecificationsSupply Voltage and Current 10 to 30V dc(10% max ripple), at less than 50 mA (exclusive of load)Supply Protection Circuitry Protected against reverse polarity and transient voltagesOutput ConfigurationBipolar: one current sourcing(PNP)and one current sinking(NPN)open-collector transistorOutput Rating250 mA max each output up to 50%C, derated to 150 mA at 70C (derate 5 mA/C)OFF-state leakage current: less than 1 HAOutput saturation voltage(both outputs): less than 1 volt at 10 ma and less than 2 volts at 250 mAOutput Protection Circuitry Protected against false pulse on power-up and continuous overload or short circuit of outputsOutput Response TimeOpposed: 2 milliseconds on and 1 millisecond OFFLaser retroreflective: less than 2 millisecondsAll others:2 milliseconds on/ofFNOTE: 100 millisecond delay on power-up; output does not conduct during this timeRepeatabilityOpposed: 0.25 milliseconds All others: 0.5 millisecondsResponse time and repeatability specifications are independent of signal strengthAdjustmentsBeneath sensor's transparent cover: Light Operate(LO)Dark Operate(DO)select switch andmulti-turn sensitivity control on top of sensor, beneath a transparent polycarbonate o-ring sealedcover, allows precise sensitivity setting(turn clockwise to increase gain. Optional logic andlogic/display modules have adjustable timing functionsIndicatorsIndicator LEDs are highly visible, located beneath a raised transparent polycarbonate dome on topof the sensorPower(Green) LED lights whenever 10 to 30V dc power is appliedand flashes to indicate output overload or output short circuitSignal (Red) LED lights whenever the sensor sees its modulated light source,and pulses at a rate proportional to the strength of the received light signalLoad (Yellow) LED lights whenever an output is conductingOptional 7-element LED signal strength display moduleConstructionfolded reinforced thermoplastic polyester housing, o-ring sealed transparent polycarbonate covermolded acrylic lenses, and stainless steel hardware. Q45s are designed to withstand 1200 psiashdown the base of cabled models has a 12"NPS integral internal conduit threadEnvironmental RatingP67. NEMA 6PLaser classificationClass ll laser product. US Safety Standards 21 CFR 1040. 10 and 1040.11(Laser Retroreflective models only) European Standards EN 60825 and IEC60825ConnectionsPVC-jacketed 4-wire(5-Wire for Laser Retroreflective)2 m or 9 m cablesFor 4-pin Mini-style QD use"Q"suffix,(5-pin Mini-style Qd for Laser Retroreflective use"Q"suffix)or for 4-pin Euro-style use"Q5"suffiX(5-pin Euro-style QD for Laser Retroreflective use Q6 suffix). QD cables are ordered separatelySee page 412, 414 and 420Operating ConditionsTemperature:-4°to+70°c(-10°to+40° for retroreflective laser modelsRelative humidity: 90% at 50C(non-condensingApplication NotesOptional logic timing modules are available. See page 155 for more informationCertificationsRetroreflective laserAll others:cE匪cUSHookup DiagramsEmitters: DC02 (p. 520Laser Retroreflective Models: DC12(p. 522)Other DC Models: DC04 (p. 520)A215Q45BB6LLXX9714 10TH AVENMINNEAPOLIS MN 55441Compies to: 21 CFR Part 1040. 1 and EN60825Peak Fower -3m, Wavolength-655.m, 2KILOHERTZ, 2%DUTYCAUTIONLASER LIGHT.DO NCT STAREAVOID EXPOSUREASER LICHT EMITTED ROM THIS APERTURE152 More informatian online at bannerengineering comPHOTOELECTRICSQ45 AC SpecificationsSupply Voltage and Current 90 to 250V ac(50-60 Hz)Average current: 20 mA Peak current: 500 mA at 120V ac, 750 mA at 250VSupply Protection Circuitry Protected against transient voltages乏5CmOutput ConfigurationQ45VR2 models: SPDT (single-pole double-throw) electromechanical relay output (except emitters)Q45BW22 models: Short circuit/overload protected FET solid-state relayOutput RatingQ45VR2 modelsMax. switching power(resistive load): 150W, 600 VAOO卫Max switching voltage (resistive load ) 250V ac or 30V dcMax switching current(resistive load ) 5A@ 250V acMin voltage and current: 5v dc, 0. 1 mAMechanical life of relay: 10,000,000 operationsElectrical life of relay at full resistive load: 100,000 operationsQ45BW22 modelsContinuous current:300 mAma.to50°C( derate to200mAat70°C,5mA°C)ONmInrush current: 3A max for 100 milliseconds 5a max for 1 millisecondOFF-state leakage current: less than 100 LASaturation voltage: less than 3V at 200 mAOutput Protection Circuitry Q45VR2 models: Protected against false pulse on power-upQ45BW22 models: Manually-resettable output latch-out trips in the event of an output overload orshort circuit condition. The green Power LED flashes to indicate the latch-out. To reset the outputremove power to the sensor and load for 5 seconds, then restore powerOutput Response TimeQ45VR2 models: 15 milliseconds ON/OFFQ45BW22 modelsOpposed: 2 milliseconds on, 1 millisecond OFFAll others: 2 milliseconds ON/OFFNOTE: 100 millisecond delay on power-up. Output does not conduct during this timeRepeatabilityOpposed: 0.25 milliseconds: All others: 0.5 millisecondsResponse time and repeatability specifications are independent of signal strengthAdjustmentsBeneath sensor's transparent cover: Light Operate(LO), Dark Operate(DO)select switch, andmulti-turn sensitivity control on top of sensor, allows precise sensitivity setting(turn clockwise to increasegain). Optional logic and logic/display modules have adjustable timing functionsIndicatorsIndicator LEDs are highly visible, located beneath a raised transparent polycarbonate dome antop of the sensorPower(Green)LED lights whenever 90-250V ac power is applied, and flashes to indicate outputoverload or output short circuitSignal(Red) LED lights whenever the sensor sees its modulated light source, and pulses at arate proportional to the strength of the received light signalLoad (Yellow) LED lights whenever an output relay is energizedOptional 7-element LED signal strength display moduleConstructionMolded reinforced thermoplastic polyester housing, o-ring sealed transparent polycarbonate cover,molded acrylic lenses, and stainless steel hardware. Q45s are designed to withstand 1200 psiwashdown. The base of cabled models has a 12" NPS integral internal conduit threadEnvironmental RatingNEMA 6P: EC IP67ConnectionsQ45VR2 models: PVC-jacketed 2-Wire emitters or 5-wire (all others)2 m or 9 m unterminated cablesor 3-pin(emitters)or 5-pin (all others)Mini-style quick-disconnect(QD) fittings are availableQ-suffix models). QD cables are ordered separately. See page 420Q45BW22 models: PVC-jacketed 2 m or 9 m cables, or 3-pin Mini-style ("Q"suffix models )or 4-pinAicro-style (Q1 suffix models) quick-disconnect(QD) fittings are available. Qd cables are orderedseparately. See pages 420 and 419Operating ConditionsTemperature:-40°to+70°cRelative humidity: 90% at 50%C(non-condensing)ext pagMore information online at bannerengineering com153PHOTOELECTRICSQ45 AC Specifications (cont'd)Application NotesTransient suppression is recommended for contacts switching inductive loadsOptional logic timing modules are available. See page 155 for more informationCertificationsQ45VR2 modelsQ45BW22 modelsC∈匪scHookup DiagramsVR2 Models: Emitters: AC03(p. 525Other AC Models: AC08 (p 526)BW22 Models: Cabled Mini QD: AC05 (p 526Micro QD: AC06(p. 526Cabled Mini QD Emitters: AC03(p. 525 )Micro QD Emitters: ACO7(p 526)Q45 Universal Voltage SpecificationsSupply Voltage and Current 24 to 250V ac, 50/60 Hz or 12 to 250V dc(1.5 watts max.Supply Protection Circuitry Protected against transient voltages. DC hookup is without regard to polarityOutput ConfigurationQ45VR3 models: SPDT Single-Pole, Double-Throw) electromechanical relay output. All modelsexcept emittersQ45BW13 models: Optically isolated SPST solid-state switch. All models except emittersOutput RatingQ45VR3 modelsMax switching power(resistive load 1250VA, 150WMax switching voltage(resistive load): 250V ac, 125V dcMax. switching current(resistive load ) 5A@ 250V ac, 5A 30V dc derated to 200 mA 125V dcMin. voltage and current: 5v dc, 10 mAMechanical life of relay: 50,000,000 operationsElectrical life of relay at full resistive load 100,000 operationsQ45BW13 models250V ac 250V dc. 300 mAOutput saturation voltage: 3V at 300 mA, 2V at 15 mAOFF-state leakage current: less than 50 UAInrush current: 1 amp for 20 milliseconds, non-repetitiveOutput Protection Circuitry Protected against false pulse on power-upOutput Response TimeQ45VR3 models: 15 milliseconds ON/OFFQ45BW13 models: opposed: 2 milliseconds ON, 1 millisecond of" ing this timeNOTE: 100 millisecond delay on power-up. Relay is de-energized durAll others 2 milliseconds on/oFF(NOTE: 100 millisecond delay on power-up. Output does not conduct during this time.RepeatabilityOpposed: 0.25 millisecondsAll others:0.5 millisecondsResponse time and repeatability specifications are independent of signal strengthAdjustmentsBeneath sensor's transparent cover: Light Operate(LO), Dark Operate(DO)select switch,and multi-turn sensitivity control on top of sensor, beneath a transparent polycarbonate o-ring sealedcover, allows precise sensitivity setting(turn clockwise to increase gain ). Optional logic and logic/displaymodules have adjustable timing functionsIndicatorsIndicator LEDs are clearly visible beneath a raised transparent polycarbonate dome on top of the sensorPower(Green) LED lights whenever 24 to 250V ac, or 12 to 250V dc power is appliedSignal (Red) LED lights whenever the sensor sees its modulated light source, and pulses at arate proportional to the strength of the received light signaload (Yellow) LED lights whenever the output relay is energizedOptional 7-element LED signal strength display moduleConstructionMolded reinforced thermoplastic polyester housing, o-ring-sealed transparent polycarbonate cover,molded acrylic lenses, and stainless steel hardware. Q45s are designed to withstand 1200 psiwashdown. The base of cabled models has a 12"NPS integral internal conduit threadMore on154 More informatian online at bannerengineering com